Linear Tube Audio MicroZOTL MZ3
Here is the MZ3. Based on out flagship MicroZotl Preamp. Difference is 3 RCA inputs instead of 5, no tape monitor function, no option for transformer balanced input and the powersupply is separat. A beauty on a small footprint. MZ3 is now available in a revised version where the resolution on the stepped R2R volume control is better. There is also implemented the gain change option found in the MicroZotl Preamp and the integrated amps.
Amplifier class: Push-pull Class A, no negativ feedback
Sensitivity: 0.6V RMS [full output]
Output impedance: (measured @ 0.5A, 60 Hz) 2 ohms
Input impedance: 50k
Power Supply Input: Auto-switching 100V / 120V / 220 / 240V operation or linear supply user-switchable between 110/120 and 220/240 (contact us if in need of a 100V linear supply)
Power Supply Output: 12VDC 2.5 amps
Hum and noise: minimum 60mV RMS or 90dB below full output (20Hz-20kHz)
Power consumption from ac power source: 33W
Power output: with 4-ohm load: 1W, 1% THD, with 14-ohm load: 0.5W, 1% THD
Channel separation: (4-ohm loads) 46dB, 100Hz-10kHz, (14-ohm loads): 54 dB, 100Hz-10kHz
Frequency response full power: (4-ohm load) +0, -1dB 10Hz-20kHz, (14-ohm load): +0, -1dB 5Hz-50kHz,
Voltage gain: (4-ohm load): 10.3dB, (14-ohm load): 12.4dB
Amplifier: 9 1/2 inches (24.1 cm) wide, 4 3/4 inches (12.0 cm) tall, 7 7/8 inches (19.7 cm) deep (including connectors)
Linear power supply: 12" (30.48 cm) x 3.25" (8.26 cm) x 4.25" (10.8 cm)
With switching supply: 5.35 lbs (2.5 kg) - amplifier and external power supply)
With linear supply: 8.94 lbs (4.1 kg) - amplifier and external power supply)
Finish: Aluminum case w/ lexan top
Tube complement per channel: 12AT7/6201 input, 6SN7 or 12SN7 output. (We supply NOS 12SN7 tubes by default. Jumpers on the circuit board allow you to easily switch between 12V and 6V, allowing you to use both 6SN7 and 12SN7 tubes and expanding your tube choices. The 12SN7 and 6SN7 are sonically identical and differ only in their heater voltage.) 12AU7 tubes can replace the 12AT7 tubes to lower the gain.
Refund & Return
We offer 14 days "in home" testing. If you regret your purchase we refund, minus restocking fee 15%, your payment exclusive shipping to you and back to us, custom/local fees added when received and added when returned. We basicaly just need a written notification within 14 days from receiving the amplifier. And we need the purchase returned in its originak package. If there was any free/complementary products included they shall also be returned. No questions asked.
Delivery & Shipping
This product is handcrafted and build to prepaid order only. Production time is typical 21 days. Contact us for further info. Due to the low weight of our amplifiers we use Airfreight - takes typical 5 working days. Special shipping requirements are welcome.
We offer 2 years on the amp and 12 month on the tubes. You can transfer the warranty.