Linear Tube Audio MicroZOTL MZ2
  • Linear Tube Audio MicroZOTL MZ2

    Here is the MZ2 which started all the buzz about LTA. A 8 years continuing request for David Bernings "Blue Box" made LTA debut in 2015 with the MZ2. Here they released a revised version designed by Mark Schneider and David Berning. Now it is available in a Mk2 version and comes with different additions/options. The listed price is for the entry model: SMPS, No Remote, 2 ft dc cable and standard IEC mains power cable with Schuko or UK plug.

    • Key specifications:

      Amplifier class: Push-pull Class A, no feedback

      Sensitivity: 0.6V RMS [full output]

      Output impedance: (measured @ 0.5A, 60 Hz) 2 ohms

      Input impedance: 50k

      Power Supply Input: Auto-switching 100V / 120V / 220 / 240V operation or linear supply user-switchable between 110/120 and 220/240 (contact us if in need of a 100V linear supply)

      Power Supply Output:  12VDC 2.5 amps

      Hum and noise: minimum 60mV RMS or 90dB below full output (20Hz-20kHz)

      Power consumption from ac power source: 33W

      Power output: with 4-ohm load: 1W, 1% THD, with 14-ohm load: 0.5W, 1% THD

      Channel separation: (4-ohm loads) 46dB, 100Hz-10kHz, (14-ohm loads): 54 dB, 100Hz-10kHz

      Frequency response full power: (4-ohm load) +0, -1dB 10Hz-20kHz, (14-ohm load): +0, -1dB 5Hz-50kHz,

      Voltage gain:  (4-ohm load): 10.3dB, (14-ohm load): 12.4dB


      Amplifier: 9 1/2 inches (24.1 cm) wide, 4 3/4 inches (12.0 cm) tall, 7 7/8 inches (19.7 cm) deep (including connectors) 
      Linear power supply: 12" (30.48 cm) x 3.25" (8.26 cm) x 4.25" (10.8 cm) 

      Net weight:

      With switching supply: 5.35 lbs (2.5 kg)  - amplifier and external power supply)
      With linear supply: 8.94 lbs (4.1 kg)  - amplifier and external power supply)

      Finish: Aluminum case w/ lexan top

      Tube complement per channel: 12AT7/6201 input, 6SN7 or 12SN7 output. (We supply NOS 12SN7 tubes by default. Jumpers on the circuit board allow you to easily switch between 12V and 6V, allowing you to use both 6SN7 and 12SN7 tubes and expanding your tube choices. The 12SN7 and 6SN7 are sonically identical and differ only in their heater voltage.) 12AU7 tubes can replace the 12AT7 tubes to lower the gain.

    • Refund & Return

      We offer 14 days "in home" testing. If you regret your purchase we refund, minus restocking fee 15%, your payment exclusive shipping to you and back to us, custom/local fees added when received and added when returned. We basicaly just need a written notification within 14 days from receiving the amplifier. And we need the purchase returned in its originak package. If there was any free/complementary products included they shall also be returned. No questions asked.

    • Delivery & Shipping

      This product is handcrafted and build to prepaid order only. Production time is typical 21 days. Contact us for further info. Due to the low weight of our amplifiers we use Airfreight - takes typical 5 working days. Special shipping requirements are welcome.

    • Warranty

      We offer 2 years on the amp and 1 year on the tubes. You can transfer the warranty.

    kr 11.695,00Pris